What Are the Best Ways to Fix Home Door Damage? 

Door damage is a major problem, especially because new doors can be expensive. There are some things, like water damage, that you can’t prevent. However, there are also some things, like a door from an attack, that you can prevent by bolstering your front door.

Regardless of the cause, you’ll need to repair or replace your front door sooner or later. You can address the cause and prevent future damage, or you can keep your front door protected and vigorous. If you’re wondering what are the best ways to fix home door damage, keep reading to find out.

Gather Your Supplies

Start off by measuring the dimensions of the door, including the length, width, and thickness. Having the exact measurements will ensure that the parts fit properly.

You would then need to purchase the necessary supplies, such as decorative wall bumpers to stop doors, strike plates, hinge pins, a saw, and sandpaper. Additionally, you may need other types of paint or sealant for the job as well.

Once all of the items are together, you can begin the repair process. Make sure to follow any included instructions carefully and use safety precautions to prevent further.

Choose Between Putty or Filler

Putty is ideal for small, low-traffic doors or doors with minimal damage. It has a smooth texture that makes it easy to work with and is often the preferred choice for aesthetic touches after the repair.

Filler is the more exhaustive choice for larger and heavily damaged. As it hardens quickly after being applied, it is best for filling larger gaps in doorframes, but it can also be used to rebuild larger sections of the broken.

Apply Wood Filler to the Crack

It is important to be sure the door crack is thoroughly cleaned prior to adding the wood filler. Use a rag or brush to get rid of any debris. When the crack is dry, begin to slowly add the wood filler.

A putty knife can be used to fill the crack. Carefully go over the surface of the wood filler to ensure it’s even and smooth.

Prepare for the Filler’s Dry Time

This means removing any chipped paint and sanding the surrounding area down to a smooth surface. Once this is done, use a small sponge roller or brush to apply the wood filler evenly. Allow it to dry completely before sanding it down for a smooth finish.

After the filler is dry, use a primer to help the paint stick better. Once the primer is dry, use high-quality latex paint. Brush the paint in thin layers, allowing the brush strokes to overlap to achieve a uniform look.

Sand the Filled Surfaces

First, using a sheet of sandpaper, lightly sand the filled area to remove any imperfections. Be sure to use a good grade of sandpaper so that it doesn’t cut too deeply into the surface of.

After sanding, make sure to vacuum the area thoroughly to remove all of the dust. If there are any grooves or scratches, you can use wood putty to fill them in. Apply liberally, then allow it to dry before sanding the filled surfaces.

These Are the Best Ways to Fix Door Damage

Overall, minor door damage can be easily repaired with a few DIY fixes, such as filling in scratches with wood filler or adjusting a loose hinge. For significant, professional repairs are recommended.

Looking for more tips and ideas? We’ve got you covered. Check out some of our other posts now.