Can Fencing Contractors Move My Current Fence? 

Fencing your property can help increase privacy and security around your home. Homeowners often go for sturdy and permanent fences for their property, which makes moving fences difficult. Fencing contractors can help you move your current fence to a new location if you plan to redesign your property. Here’s how the experts can help move your existing fence:

Obtain the Necessary Permits

Moving or replacing a fence may require permits, like many other home improvement or renovation projects. HOA and building authorities insist on the need for permits to make sure your fence material, size, design, and placement meets specific construction code requirements. Fences also need to withstand certain weather elements like wind, so the permits verify compliance with the zonal needs.

Fencing contractors know the most effective way to file for a permit so that the application is accepted. This helps you get a fence permit quickly, allowing you to start the project sooner. Your contractor can also obtain waivers and file necessary notices so that they are in compliance with the law. They submit prescriptive drawings and plans for the proposed fence location to ascertain your construction is legal.

Inspect the Fence and Determine How To Move

Before moving the fence, contractors inspect the panels, posts, brackets, and fasteners for possible wear and tear. Worn-out sections of your fence will need replacing before re-installation at the new location to maintain a sturdy fence. The inspection helps you budget accurately for how much the project will need due to part replacements. Your fencing contractor will also offer a reasonable quote depending on the work involved and the technique required to move the fence.

Handle Fence Removal and Assembly

Many contractors opt to move a fence by disassembling it, then reconstructing it at the new location. The technique may vary depending on the type of fence you are moving to prevent damage:

Moving Vinyl and Wood Fences

Vinyl fences are made from panels that are nailed or screwed onto posts. Vinyl panels can warp or scratch easily, so one needs to be careful when getting them off. You need a drill, nail puller, or hammer to remove nails or screws, then apply some pressure to remove panels that may be glued in place. Removing the panels in whole sections will make reassembly easier if the panels are attached to a bracket.

Wood fences also have panels nailed on brackets that connect to posts, so you can disassemble them in the same way. After removing the panels, pull the posts from the ground and place them in pre-dug holes at the new fence location. Using cement when setting the posts in the ground helps so they are sturdy and can withstand the elements. Screw or nail back the brackets on your posts. Repair or replace any panels that might be damaged during disassembly, transportation, and assembly.

Moving Iron Fences

Iron fences are often welded together, making them hard to move. You need tools like a hammer, welding equipment, a metal cutting saw, a shovel, and a screw gun with bits for the job. An adjustable wrench can help loosen bolts if your fence is assembled using fastening nuts.

The contractor will cut or unfasten the horizontal panels from the posts and then detach any sections built into walls or pillars. Removing posts from the ground and transferring them into the new holes sets the foundation for your new fence. Contractors then attach or weld the panels back in place.

Hire Reputable Fencing Contractors

Moving a fence can be tasking, so you may need expert help handling the job. Fencing contractors can help you get the necessary permits and file legal notices for moving your fence. They also have the proper tools and expertise to make moving your fence safe and easy. Look for a qualified fencing contractor for your fence relocation.

Paragraph